Introduction:
A rate equation characterizes the rate of reaction, and its form may either be suggested by theoretical considerations or simply be the result of an empirical curve-fitting procedure.
The determination of the rate equation is usually a two-step procedure; first the concentration dependency is found at fixed temperature and then the temperature dependence of the rate constants is found, yielding the complete rate equation.
The experimental batch reactor is usually operated isothermally and at constant volume because it is easy to interpret the results of such runs. This reactor is a relatively simple device adaptable to small-scale laboratory set-ups, and it needs but little auxiliary equipment or instrumentation. Thus, it is used whenever possible for obtaining homogeneous kinetic data.
There are two procedures for analyzing kinetic data:
1- Integral method: we guess a particular form of rate equation and, after appropriate integration and mathematical manipulation, predict that the plot of a certain concentration function versus time should yield a straight line. The data are plotted, and if a reasonably good straight line is obtained, then the rate equation is said to satisfactorily fit the data.
2- Differential method: we test the fit of the rate expression to the data directly and without any integration. However, since the rate expression is a differential equation, we must first find (l/V)(dNldt) from the data before attempting the fitting procedure.
Constant-Volume Batch Reactor
When we mention the constant-volume batch reactor we are really referring to the volume of reaction mixture, and not the volume of reactor. Thus, this term actually means a constant-density reaction system. Most liquid-phase reactions as well as all gas-phase reactions occurring in a constant-volume bomb fall in this class.
In a constant-volume system the measure of reaction rate of component i becomes:
Thus, the rate of reaction of any component is given by the rate of change of its concentration or partial pressure.
For gas reactions with changing numbers of moles, a simple way of finding the reaction rate is to follow the change in total pressure µ of the system.
Analysis of Total Pressure Data Obtained in a Constant-Volume System.
For isothermal gas reactions where the number of moles of material changes during reaction, let us develop the general expression which relates the changing total pressure of the system µ to the changing concentration or partial pressure of any of the reaction components.
Write the general stoichiometric equation, and under each term indicate the number of moles of that component:
المادة المعروضة اعلاه هي مدخل الى المحاضرة المرفوعة بواسطة استاذ(ة) المادة . وقد تبدو لك غير متكاملة . حيث يضع استاذ المادة في بعض الاحيان فقط الجزء الاول من المحاضرة من اجل الاطلاع على ما ستقوم بتحميله لاحقا . في نظام التعليم الالكتروني نوفر هذه الخدمة لكي نبقيك على اطلاع حول محتوى الملف الذي ستقوم بتحميله .
الرجوع الى لوحة التحكم
|